SIGNAL TRANSMITTERS & ISOLATORS   ST Series                   

This range of Signal Transmitters and Isolators encompasses power and process measurements as per the

table below. They are a microprocessor design with input and output range selection and calibration by programming

the unit via front keys and display. When not in programming mode the display can read measured value.

The ST range has selectable input and output ranges and options for alarm/control relay and RS485 (Modbus RTU).

This series plugs in to an 11 pin Din Rail mounted base. Wiring is on the base so never needs to be disturbed.

 The Transmitter can be simply unplugged for workshop calibration or replacement.

                                                                                                                                            .