TX Slimline

This range of Signal Transmitters and Isolators encompasses power and process measurements. They are a slimline (22.5mm) design with input and output range selection and calibration by programming the unit via dipswitches. Most instruments can have dual outputs.

The SC range has selectable input and output ranges .

The instruments are mounted on DIN Rail.

This range of Signal Transmitters and Isolators encompasses power and process measurement. They are a microprocessor design with input and output range selection and calibration by programming the unit via front keys and display. When not in programming mode the display can read measured value.

The ST range has selectable input and output ranges and options for alarm/control relay and RS485 (Modbus RTU).

This series plugs in to an 11 pin Din Rail mounted base. Wiring is on the base so never needs to be disturbed. The Transmitter can be simply unplugged for workshop calibration or replacement.

This range of Signal Transmitters and Isolators encompasses power and process measurements. They are an analogue design with input and output range selection and calibration by dipswitch and potentiometer.

Dual Isolated outputs are available. This series plugs in to an 8 pin Din Rail mounted base. Wiring is on thebase so never needs to be disturbed. The Transmitter can be simply unplugged for workshop calibration or replacement.

Includes loop isolator for 4~20mA applications.

• Full family of dedicated function trip alarms   
• Adjustable or fixed deadbands   
• AC power standard, other ranges available   
• Simple, easy to use and adjust

Data Sheet on demand

• ET-1200 L/U Single trip AC current/voltage alarm
• ET-1202 L/U Dual trip AC current/voltage alarm
• ET-1205 Dual trip thermocouple/millivolt alarm
• ET-1208 Single trip thermocouple/millivolt alarm, adjustable deadband
• ET-1214 Single trip DC current/voltage alarm
• ET-1215 Dual trip DC current/voltage alarm
• ET-1218 Single trip DC current/voltage alarm, adjustable deadband
• ET-1219 Dual trip DC current/voltage alarm, adjustable dadband
• ET-1228 Single trip DC current/voltage deviation alarm, adjustable, deadband
• ET-1234 Failsafe single trip DC current/voltage alarm
• ET-1235 Failsafe dual trip DC current/voltage alarm
• ET-1275 Dual trip RTD alarm
• ET-1278 Single Trip RTD alarm, adjustable deadband

The SC-1300 family of signal conditioners can convert the most commonly used process signals into conditioned current and voltage outputs, needed for control systems and monitoring devices. Dedicated functionality and isolation from control systems improves reliability.

Features and Benefits

• Full family of dedicated function signal conditioners 
• Provides "live" powered analog output, for use with other loop powered devices 
• AC power standard, other ranges available 
• Simple, easy to use and adjust

Data sheet on demand

• SC-1300 DC current transmitter
• SC-1300L/U AC current/voltage transmitter
• SC-1300R Slidewire/potentiometer transmitter
• SC-1302 DC current/voltage isolating transmitter
• SC-1302 4 input hi-lo selector
• SC-1324 Median selector
• SC-1326 Isolated millvolt transmitter
• SC-1326W Isolated thermocouple transmitter
• SC-1330 Square root extractor
• SC-1350 Frequency transmitter
• SC-1352 Multiplier/divider
• SC-1354 4 input adder-subtractor
• SC-1356 Linear integrator
• SC-1358 Square root integrator
• SC-1362 Signal limiter
• SC-1364 Lead/lag transmitter
• SC-1372 Isolated RTD transmitter
• SC-1364 RTD Transmitter
• SC-1380 Pulse duration transmitter
• SC-1382 Pulse duration receiver
• SC-1396 Rate-limited signal transmitter
• SC-1398 Ratio/bias transmitter